What is the first thing you want to do coming back home after a hectic day? A hot bath? Imagine you step into the bathroom, and cold water welcomes you. This is something no one can even imagine during chilly winters. Your electric water heater is not working well? You should immediately determine the cause why it is not heating water.
A failed heating element causes little or no heating problems. You can replace it easily as it is not that expensive. Take care of the maintenance of the unit so that you can prevent problems.
Electric water heater problems:
Electric tankless water heaters are an alternative to tank water heaters. They are cost-effective and space-saving. Be it your tiny house, a small studio, or a large home; you can choose a model and install it without worrying about the space. But if your electric tankless water heating unit is not working properly, then evaluate it and determine the problem.
How to Troubleshoot Electric Water Heater Problems? Here are a few tips regarding troubleshooting electric water heater problems:
- Leak problems:
The first thing you should do is to turn off the unit and cut the power. Safety comes first, so make sure that there is no electricity coming to the unit. Then check what is wrong with the unit. Is it leaking? The water leaks are caused by:
- Excessive pressure
- A stuck valve
- The faulty T&P relief valve
- Adjacent plumbing connection leakage
- Bad gasket
- A loose heating element bolt
Start checking with the temperature and pressure relief valve. Put a bucket under the overhead pipe and open valve. Then flush it to clear the debris. If it still leaks, then you have to replace it. Lower the thermostat settings. If there are any loose pipe connections, tighten them. If there is still leakage, then consult a professional plumber.
- Water temperature problems:
If the water coming out of the tap is too hot, then check thermostat settings. You should set the setting between 110oF to 140oF. If water is not hot enough, then there might be something wrong with the thermostat, or it may happen due to crossed hot and cold connections. When the problem arises due to crossed hot and cold connections, then turn off the water supply and turn on the hot water faucet.
Over time sediments can gather inside a water heater, which may hinder the function of the unit. The debris collected in the unit can damage it, and you may hear a rumbling noise. If the water heater is creating noise while working due to debris, then flush out your tankless water heater.
No matter what type of a tankless water heater you have purchased, take care if its maintenance. The manufacturers suggest flushing a tankless water heater at least once a year so that it can continue working well. If you do not know anything about tankless water heaters and your unit is not working properly, then you should contact a professional plumber.To Read More Detailed Review Of Electric Tankless Water Heater in 2020 You must Click Here…
For More Detailed Guides About Electric Tankless water Heater Also Read: